Skip to content

Video Grabber HDMI(HGR-1001)

Real-time video capture device for HDMI 2.0.

Video Grabber HDMI (HGR-1001) is a realtime video capturing device that works using the HDMI 2.0 interface. Equipped with a passive video splitter it can be safely installed between the computer and its screen (pass-through connection) as it doesn’t even have to be powered on to forward the video signal to the display*.

Video interfaceHDMI 2.0
Network interface2 x GbE, SNMPv3 Management
Dimensions164.4 x 167 x 41.4 [mm]
Weight0,787 kg
Operating temp.5°-50° C
DC adapter12V 2A (with optional redundancy)
Power consumption10W
MTBF (calculated)841 967 hours

Configured either using web browser or via SNMPv3 HGR-1001 provides wide variety of possibilities: both lossless and lossy compression algorithms are available, captured signal can be provided as RTSP stream or saved at a user-defined network location. Support for Network Time Protocol (NTP) makes it possible to timestamp the data at the moment of its capture.

Designed for the Air Traffic Control, HGR-1001 provides an option for power and network redundancy. It can also be easily installed in a RACK using mounting brackets**. In cases where absolutely no interference in the recorded signal is allowed HGR-1001 can even emulate a specific monitor and record a mirrored video signal thus ensuring that the link between video source and the display remains untouched.

Format support

H.264LLEBMPJPGJP2PNG
RTSP
NFS
SMB
Broadcast

Connection schemes

Supported resolutions

640×4801176×6641360×7681680×10502048×1536
720×4801280×7201366×7681768×9922560×1440
720×5761280×7681440×9001920×10802560×1600
800×6001280×8001600×9001920×12003840×2160
1024×7681280×9601600×10241920×1440
1152×8641280×10241600×12002048×1080
Resolutions not listed above may still work. They just have not been officially verified.